What safe work practices should be used when working with electricity?

Which is a safe work practice when working around electricity?

Nonconductive hard-hats, gloves, and foot protection or insulating mats. Eye and face protection whenever there is danger from electric arcs or flashes. Insulated tools or handling equipment. Protective shields and barriers to protect against electrical shock and burns.

What are five safety practices that one should observe when working with electricity?

5 electrical safety tips you should know for your home

  • Replace or repair damaged power cords. …
  • Don’t overload your outlets. …
  • Avoid extension cords as much as possible. …
  • Keep electrical equipment or outlets away from water. …
  • Protect small children from hazards. …
  • Put us to the test!

What principles should be observed to stay safe when dealing with electricity or working with electrical equipment?

21 Golden Safety Rules

  • Avoid contact with energized electrical circuits. …
  • Treat all electrical devices as if they are live or energized. …
  • Disconnect the power source before servicing or repairing electrical equipment. …
  • Use only tools and equipment with non-conducting handles when working on electrical devices.
IT IS INTERESTING:  Best answer: What are the two types of hydroelectricity?

What are the safety precautions using electricity?

Electrical safety tips for kids

  • Never put fingers or other objects in an outlet.
  • Keep metal objects out of toasters.
  • Never use anything with a cord or plug around water.
  • Never pull a plug out by its cord.
  • Stay away from substations and power lines.
  • Don’t climb on power poles.
  • Never fly kites near power lines.

What are the five safety rules?

Safety Rules At Home For That Needs To Be Implemented To Make It Safer For Everyone

  • Rule 1: Always Keep The Doors Locked.
  • Rule 2: Always Keep The Doors Closed.
  • Rule 3: Keep Medicine In Safe Cabinets.
  • Rule 4: Keep The Floor Dry At All Times.
  • Rule 5: Always Have An Emergency Plan.
  • Rule 6: Ensure That Alarm Systems Are Working.

What are the 10 safety tips?

Top Ten Workplace Safety Tips

  • Reduce Workplace Stress. …
  • Use Tools and Machines Properly. …
  • Use Mechanical Aids When Possible. …
  • Wear Protective Equipment. …
  • Stay Sober. …
  • Be Aware of Your Surroundings. …
  • Correct Posture Protects Your Back. …
  • Be Alert and Awake.

What are some safety rules?

General Precautions

  1. Your safety is your personal responsibility.
  2. Always follow the correct procedures.
  3. Never take shortcuts.
  4. Take responsibility and clean up if you made a mess.
  5. Clean and organize your workspace.
  6. Ensure a clear and easy route to emergency exits and equipment.
  7. Be alert and awake on the job.

What is the most important rule of electrical safety?

Do Not Touch Energized Circuits

Never touch any energized circuit with your bare hands. You may not be privileged to know what happened later. This is a very vital and primary rule in electrical safety. It is equally important that you should treat all circuits as energized any time you come across one.

IT IS INTERESTING:  You asked: What is the electric field of a plane?

What are 10 safety tips or rules when working with power tools in the shop?

10 safety tips when handling hand and power tools

  • INSPECT YOUR TOOLS. Never issue or use a damaged or defective hand or power tool. …
  • PICK THE RIGHT TOOL. …
  • WEAR YOUR PPE. …
  • DON’T ALTER YOUR TOOLS. …
  • HANDLE WITH CARE. …
  • KEEP YOUR DISTANCE. …
  • PICK UP AFTER YOURSELF. …
  • UNPLUG AND DISCONNECT.

What are 3 things to avoid when working around an electrical hazard?

What are three things to avoid when working around an electrical…

  • unsafe equipment or installation,
  • unsafe environment, or.
  • unsafe work practices.

What are the five 5 important safeguards when using electrical equipment?

The 5 Electrical Safety Devices You Need to Have Installed in Your Home

  • Fuses. …
  • Ground Fault Circuit Interrupters. …
  • Arc Fault Circuit Breakers. …
  • Surge Protectors. …
  • Tamper Proof Receptacles. …
  • Electrical Safety Devices for Your Home | Pinellas County Electrician.

How do we use electricity properly?

Basic Safety Rules

  1. Avoid frayed or damaged cords. If electricity is flowing through a wire and the plastic or rubber covering of the wire is damaged, touching it might electrocute you. …
  2. Don’t mix electricity and water. Water conducts electricity really well. …
  3. Be extra careful around high-voltage devices.
Power generation