Yes, our heated towel racks are electric “dry” (liquid/oil free) units and can be installed “upside down”.
Can you put an electric towel rail upside down?
Turn the towel radiator upside down and screw the electric element into the either side of the towel radiator. Use PTFE tape wrapped clockwise around all male threads to assist in making watertight and complete sealed joints.
Which way do you turn heated towel rail valve on?
The most common method for adjusting temperature will be to adjust the knob by turning clockwise to turn off – I.e. cool or anti clockwise to open and up the heat. Turning the knob could be difficult, and so pliers might be required.
Can I fit a heated towel rail?
You can fit them in the same way as a standard radiator. … Simply turn off your heating, then isolate your old radiator by shutting off the valves on either side before removing it from the wall. Your new towel radiator will be connected to the existing pipework.
Can you fit an electric towel rail yourself?
They come in a variety of designs and styles to suit your existing decor and personal preference, plus you can even fit them yourself if you have decent electrical wiring and plumbing skills (though you will need to adhere to the Electrical Wiring Regulations for special installations in bathrooms and other “wet” areas …
Can a radiator be put on upside down?
There is no ‘upside down’ when it comes to radiator really. So orientated it how ever you wish. ofc bleding air is easier when u have a means to bleed it near high points, but it can still be done without that, just requires alot of tiping, tilting, turning of the PC to get the air into the res.
Can electric towel rails overheat?
The towel rail gets too hot.
Check that the correct size element is fitted because oversizing can cause the surface temperature to get too high. Towel rails feel very hot to the touch; especially chrome plated ones because they conduct heat very well.
Why is my electric towel rail not working?
If the towel rail is still not hot to touch the element is probably undersized (there may not be an alternative because the next size up may be too big). Fluid level (if liquid filled) should be checked; it should be approximately 90% full. … Dry element towel rails have a much better spread of heat.
Should both towel radiator valves be fully open?
should towel rail valves be fully open? Location: Over land and sea. Leave them fully open, you have to have at least one rad permanently open so the pump can always push water round the system when it’s on. Turn the valve anti-clockwise fully open, then back a 1/4 turn to stop it jamming.
How much does it cost to have a heated towel rail fitted?
According to Checkatrade, the average cost of installing a standard hot water heated towel rail is £235 for materials and £225 for installation. So you should expect to pay around £460 in total.
How much does a heated towel rail cost to run?
Using this formula, it would be safe to estimate the average cost to run an average towel rail heater for 24 hours at a cost to you of £ 0.23 per 24 hour day. That’s a cost of less than £0.01 per day to be warm in the mornings and the nights when showering.
Can a heated towel rail replace a radiator?
Can I replace a radiator with a heated towel rail? Yes. Heated towel rails plumb straight into your water system, just like a normal radiator and they warm up when your central heating is running. Heated towel rails are absolutely ideal for bathrooms which are short on space such as en suites or a downstairs toilet.
Who can fit an electric towel rail?
If you’re having a dual fuel heated towel rail fitted, then this needs to be connected to the hot water central heating system AND to the electrical mains supply, so you’ll either need to find a professional who can legally do both, or get a plumber and an electrician to install it safely and correctly.
How much does it cost to fit an electric radiator?
The average cost to fit a new radiator is between £110 and £470 in 2021. Your cheapest option is a single panel radiator, which would cost around £110 to £210 in the UK.
How close can an electric towel rail be to a shower?
Zone 1 is the zone above your bath or shower to a height of 2.25m. If you were to install a heated towel rail in this zone, it would need a rating no lower than IPX4. Zone 2 stretches to a 0.6m outside your bath or shower and above your bath or shower if over 2.25m.