How do I adjust the temperature on my electric fireplace?
Press the Temperature But- ton J to increase the temperature. (The electric fireplace heater and fan will only turn on if the temperature setting is higher than the room temperature. Heating icon will light up while heating.) Press the Temperature Button P to decrease the temperature.
Why is my electric fireplace not putting out heat?
Some electric fireplaces have a separate switch on the side that disables the heating element. Make sure that this switch is turned on or your electric fireplace will not produce heat. … Check electrical wiring and look for any loose connections. Make sure that the wire running to your thermostat is properly attached.
How do electric fireplace heaters work?
Electric fireplaces work by drawing in cool air, heating it internally using a heating coil and gently forcing the warmed air back out into the room by way of a fan. … As a result, electric fireplaces can provide a flame without heat so that it can be enjoyed throughout the year.
How much will an electric fireplace raise my electric bill?
The average electric fireplace uses nearly 1500 watts of power. If you use it just for ambience, then the cost can range anywhere from $0.003 to $0.03 per hour. However, if you use a heating unit as well, the costs will go up to around $0.09 per hour for a medium setting and $0.18 per hour for the maximum setting.
Do the electric fireplaces really heat a room?
Electric fireplaces work much like space heaters to provide heat to your home, but can an electric fireplace really heat a room? Using an electric fireplace is a great way to heat a room. From testing, an electric fireplace was able to increase the temperature within a room by 13.5°F (7.5°C) within 4 hours.
How do I fix the flame on my electric fireplace?
To fix the flame on an electric fireplace:
- Unplug the fireplace from the wall or isolate the power.
- Remove the access cover to the fireplace, typically located at the rear of the unit.
- If the bulb(s) have blown, replace them.
- If the motor that drives the rod has stopped working, replace the motor if possible.
What does ER mean on my electric fireplace?
If the Duraflame cord is like,not plugged all the way into the outlet SNUGLY-THEN the blinking ER (when the outlet ,or Duraflame plug) will show again if it overheats , or gets really warm. Electric Fireplace Won’t Turn On Now, check for faulty wiring. … Electric fireplaces use metal coils to create heat.
Do electric fires just plug in?
Yes, electric fires really do just plug in! However, you can also find some ‘plug in and go’ type electric fire suites. … These simply come straight out of the box in one piece and can be plugged directly into the wall for immediate use.
Are electric fireplaces worth it?
The electric fireplace is energy efficient and cost effective. There is no risk of losing the heat through the venting as the case with gas fireplaces. A gas fireplace can lose 20% to 30% of the heat through the venting decreasing the efficiency.
Do electric fireplaces need to be vented?
Q – Do Electric Fireplaces need venting? A – No, Electric fireplaces do not create any emissions and therefore do not need to be vented through a chimney, direct vent, or other source like gas and wood fireplaces do.
How long do electric fireplaces last?
Electric fireplaces can last for 10-20 years depending on how frequently they are used. Many manufacturers offer warranties ranging from 1 year to 10 years depending on the model.
Why did my electric heater stop working?
CAUSE: The most common cause for electric heater not working is blown fuses. … If it is fuses or tripped, then what you can do is that you can replace the fuse or reset the circuit breakers if required. Now plug the appliance back in and switch it on. See if the problem has been resolved.
Why does my electric fireplace turn on by itself?
Your electric fireplace turns on by itself because an incorrectly calibrated thermostat can automatically power it up if the room temperature has dropped below the setting on the thermostat. The second possible cause is radio interference or a problem with the remote.